User's Manual

Overview of the Flexent‚ Modular Cell 4.0B cabinet
installation
1- 21
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Refer to Chapter 2, Heat exchanger and solar shield configurations for
Modular Cell 4.0B cabinets on Page 2 - 69 for heat exchanger and solar
shield applications for the following configurations
4.0B dual band cabinet in
legacy line-ups with WNG
24 power cabinets
The following diagram shows configuration options for 4.0B dual band
cabinet in legacy line-ups with WNG 24 power cabinets.
1-3C
850
1-3C
1/2/3.0
1/2/3.0
850
EZBFo
EZBFo
EZBFo
BATTERY
BATTERY
BATTERY
1
2
2
P
B*
1-11C
4.0B
PCS
FRAME
FRAME
FRAME
1-2C
4.0
850
EZBFo
BATTERY
1
P
B*
1-11C
1-11C
4.0B
4.0B
PCS
PCS
1-11 PCS CARRIERS **
1-11 PCS CARRIERS ***
X-8 850 CARRIERS
1-8 850 CARRIERS
(4.0 Primary and G-1)
(4.0 Primary and G-1)
FRAME
(4.0B Dual Band)
(4.0B Dual Band)
* 850 cabinets have batteries; PCS cabinets above 8 carriers will not have batteries because of the
presence of the A6 amplifier shelf.
** The total output of the WNG-M and WNG-K power cabinets is 17 kW, which limits the total number of
carriers in the dual band cabinet. Use of an integrated power cabinet is recommended for the line-ups
shown.
*** The total output of the WNG-DJ cabinet is 21 kW, which does not limit the total number of carriers in
the dual band cabinet. Therefore, the dual band cabinet would not need integrated power in the line-up
illustrated.
WNG24
BATTERY
CABINET
1/ 2
WNG24
BATTERY
CABINET
1/ 2
WNG24
BATTERY
CABINET
1/ 2
FRONT OR REAR HEAT
EXCHANGER, AS APPLICABLE
7-8 850 CARRIERS
(1/2/3.0Primary and
G-1, 4.0 G-2)
1 - 11 PCS CARRIERS **
(4.0B Dual Band)
WNG-DJ
POWER
CAB-
INET
WNG-
M/K
POWER
CAB-
INET
WNG-
M/K
POWER
CAB-
INET
4.0B DUAL BAND
CABINET
WITHOUT
INTEGRATED
POWER
1-X
1-2C
850
1 / 2/3/4.0
1-X
850
1 / 2/3/4.0
1-4Cor
1-6C
850
4.0
1-4Cor
1-2C
850
4.0