User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

4- 1

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

............................................................................................................................................................................................................................................................

4 Power and power alarm

connections in Modular Cell

4.0B cabinets with integrated

power

Overview

Purpose

The purpose of this chapter is to provide power and power alarm cable

installation instructions for 4.0B primary and dual band cabinets with

integrated power, as well as for power and alarm connections from

battery cabinets connected to them. Also provided are power references

for cabinets without integrated power

This chapter contains the following sections.

Modular Cell 4.0B cabinets without integrated power that

utilize non-Lucent power (reference)

4 - 2

Power and alarm wiring overview 4 - 3

Safety precautions 4 - 5

How to route and connect the AC utility wires at a Modular Cell

4.0B primary or dual band cabinet

4 - 6

How to make the cable connections between the first WNG

battery cabinet and the 4.0B primary cabinet

4 - 14

How to make the cable connections between the second WNG

battery cabinet and the first WNG battery cabinet

4 - 44

How to install 60ECv2 battery cabinets with a 4.0B primary

cabinet with integrated power (reference)

4 - 71