User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

4-6

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

...........................................................................................................................................................................................................................................................

Power and power alarm connections in Modular Cell 4.0B

cabinets with integrated power

How to route and connect the AC

utility wires at a Modular Cell 4.0B

primary or dual band cabinet

Overview

Purpose

This section contains instructions for routing and connection of the AC

utility wires at a Modular Cell 4.0B primary or dual band cabinet.

Route and connect the AC utility wires

Overview

This section contains the following procedures.

Prepare the AC power module (ACPDA) for connection of the

AC utility wires

4 - 7

Install a 2-inch flexible conduit fitting on the primary or dual

band cabinet

4 - 9

Connect the flexible conduit between the existing metal

conduit and the fitting at the primary or dual band cabinet

4 - 10

Route and connect the AC utility wires in the primary or dual

band cabinet

4 - 12