User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 63
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
• For 4.0 and 4.0B previous cabinets only: Using the eight sets of
hex head cap screws, plain washers, and lock washers supplied
with the previously mounted RF cable, attach the 4.0B dual band
cabinet with the screws on the inside of the 4.0B dual band cabinet
being installed.
Important! When performing the next step the screws must be
tightened to a point that no gasket material is visible around the
RF cable guide.
GUIDE
L
oose nuts and washers
not needed on 4.0 or 4.0B
existing cabinets