User's Manual

Cable connections in the Modular Cell 4.0B cabinets
3- 5
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
4 Terminate the end of the cable with the DIN connector provided.
................................................................................................................................
............................................
5 Remove the five tamper-proof screws that attach the top panel to the
antenna cable cover and remove the cover. Refer to the figure below.
................................................................................................................................
............................................
6 Insert the connector end of the jumper cable through the applicable
opening in the antenna cable cover. Refer to the figure below.
................................................................................................................................
............................................
7 Connect the GPS antenna jumper cable to the "GPS IN". Refer to the
figure below.
MODULAR CELL 4.0B PRIMARY CABINET
REAR VIEW
TOP COVER
REMOVED
GPS
ANTENNA
ENTRY
Connect GPS
antenna jumper
cable here