User's Manual

Cable connections in the Modular Cell 4.0B cabinets
3- 7
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
9 Slowly slide the boot towards the cabinet and insert it into the opening
on the antenna cover. Refer to the figure below.
................................................................................................................................
............................................
10 Pull the boot back towards you to ensure that the boot is fully seated.
Refer to the figure above.
Important!Skip to Connect the GPS antenna jumper cable to the
GPS surge protector at the GPS antenna cable on Page 3 - 11 to
E
ND OF STEPS
....
.........................................................................................................
..................................................................
continue the installation.
GPS ANTENNA
JUMPER CABLE