User's Manual

3-14
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
Cable connections in the Modular Cell 4.0B cabinets
................................................................................................................................
............................................
4 Prepare a conduit section for installation between the existing metal
conduit and the antenna cable cover. Refer to the figure on Page 3-14
................................................................................................................................
............................................
5 Thread the T1/E1 and user alarm cables through the assembled conduit
section and into the antenna cable cover through the 2-inch hole cover
on the left rear panel.
................................................................................................................................
............................................
6 Install the conduit section between the existing metal conduit and the
antenna cable cover. Refer to the figure below.
................................................................................................................................
............................................
7 Assemble the parts as shown in the figure below, and attach the conduit
with the locknut on the inside of the cabinet.
................................................................................................................................
............................................
8 Thread the plastic bushing onto the end of the connector assembly,
inside the cabinet. Refer to the figure above.
2-INCH SEAL-TIGHT
CONNECTOR ASSEMBLY
2-INCH LIQUID-TIGHT
STEEL FLEXIBLE CONDUIT
CUSTOMER
PROVIDED
LUCENT TECHNOLOGIES
EQUIPMENT
LOCK NUT
(METAL)
PLASTIC
B
USHING
SEALING RING