User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 55
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Important! Skip the next step if the 4.0B dual band cabinet
being installed is equipped with integrated power, and proceed to
Position the 4.0B dual band Modular Cell cabinet on Page 2 - 56
................................................................................................................................
............................................
4 Open the door of the 4.0B dual band cabinet and remove the AC port
cover from the bottom right side.
REMOVE LEFT
REAR PANEL
ANTENNA
CABLE
COVER
PLACE
CATERPILLAR
GROMMET
AROUND OPENING
(METAL CABLE
COVERS ONLY)
REMOVE SQUARE
SIDE PANEL
MODULAR CELL 4.0B DUAL BAND CABINET
SIDE VIEW
REAR VIEW
ATTACH THE DC CABLE SUPPORT HERE
REMOVE ROUND AC PORT COVER
IF THE DUAL BAND CABINET
BEING INSTALLED DOES NOT
HAVE INTEGRATED POWER