User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

Cable connections in the Modular Cell 4.0B cabinets

3- 25

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

............................................................................................................................................................................................................................................................

................................................................................................................................

............................................

3 At the WNG power cabinet, locate the conduit previously installed for

routing of the T1/E1 cable(s) to the Modular Cell 1.0/2.0 cabinet. Refer

to the figure below.

................................................................................................................................

............................................

4 Locate the T1/E1 cable(s) and pull through the conduit.

................................................................................................................................

............................................

5 Route the T1/E1 cable(s) into the WNG power cabinet cable cover, as

shown in the figure below.

................................................................................................................................

............................................

6 Route the T1/E1 cable(s) to the right through the WNG cable cover and

through the cable support into the antenna cable cover of the Modular

Cell 1.0/2.0 primary cabinet. Refer to the figure on Page 3-26.

................................................................................................................................

............................................

7 Route the T1/E1 cable(s) through the Modular Cell 1.0/2.0 primary

cabinet antenna cable cover and into the next an.tenna cable cover. Refer

to the figure on Page 3-26.

WNG

POWER

CABINET

CABLE

COVER

REAR VIEW

SIDE VIEW

METAL

CONDUIT

FLEXIBLE

CONDUIT