User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

Component installation in the Modular Cell 4.0B and the

WNG24-BC battery cabinets

5- 81

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

............................................................................................................................................................................................................................................................

How to route the thermal probe cable(s) and mount the thermal

probe(s) in the battery cabinets

THERMAL PROBE INSTALLATION INSTRUCTIONS VARY FOR FIRST

AND

SECOND

BATTERY CABINETS. A THERMAL PROBE CABLE AND THERMAL PROBE ARE

SHIPPED WITH THE FIRST

BATTERY CABINET. IF ONLY ONE BATTERY CABINET IS

BEING INSTALLED, THE THERMAL PROBE M

UST

BE PLACED IN THE FIRST

BATTERY CABINET. A SECOND THERMAL PROBE CABLE IS SHIPPED WITH THE

SECOND

BATTERY CABINET. THIS CABLE IS CONNECTED TO THE THERMAL

PROBE CABLE IN THE FIRST

BATTERY CABINET, AND ROUTED TO THE SECOND

BATTERY CABINET. THE THERMAL PROBE IS THEN MOVED TO THE SECOND

BATTERY CABINET AND CONNECTED TO THE SECOND CABLE. FOLLOW THE

INSTRUCTIONS CAREFULLY

IMPORTANT NOTE