User's Manual

Component installation in the Modular Cell 4.0B and the
WNG24-BC battery cabinets
5- 87
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
5 Repeat Steps 2 and 3 for the three remaining +24-VDC cables.
Connect the DC return
cables from the battery
cabinet to the return bus in
the primary cabinet
Perform the following steps to connect the four 24-VDC return cables
from the battery cabinet to the return bus in the primary cabinet
................................................................................................................................
............................................
1 Remove the tape or shrink tubing from the end of one of the four black
24-VDC return cables.
................................................................................................................................
............................................
2 Connect (or reconnect) this 24-VDC return cable (from the first battery
cabinet) in the Modular Cell 4.0B primary cabinet.