User's Manual

Component installation in the Modular Cell 4.0B and the
WNG24-BC battery cabinets
5- 91
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
The figure below shows the battery wiring diagram for C-11 batteries.
The left three batteries are connected in parallel with each other, as are
the right three batteries. The two sets of three batteries are connected in
series via the series bus bar. The strings on the shelves are then
connected in parallel via the connectors on the battery compartment
front panel. Refer to the figure below. Note that type 2 battery shelves
are shown. The fixed connector is turned 180 degrees on type 1
shelves.
The figure below shows the battery cabling plan.
1
2
3
+
+
+
_
_
_
_
_
4
5
6
+
_
+
+
POSITIVE
PARALLEL
BUS BAR
SERIES
BUS BAR
BATTERY
CABLES
NEGATIVE
PARALLEL
BUS BAR
NEGATIVE
PARALLEL
BUS BAR
POSITIVE
PARALLEL
BUS BAR
+
_
+
_
+
_
+
_
+
_
+
_
THE FIXED
CONNECTOR
IS TURNED 180
DEGREES ON
TYPE 1
SHELVES
S-1
S-2
1
2
3
4
5
6
1
2
3
4
5
6
+
_
+
_
+
+
_
_
+
_
+
_
THE FIXED
CONNECTOR
IS TURNED 180
DEGREES ON
TYPE 1
SHELVES