User's Manual

6-14
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
RF cable connections between existing Modular Cell
cabinets and a 4.0B dual band cabinet
15 MHZ INTER-FRAME CABLE: LINE-UP 3
LINE-UP
PRIMARY CABINET CONNECTION
PROCEED TO:
C
onnect the 15MHz cable to the J5 port on
the "Smart Switch" in the1.0/2.0 primary
c
abinet as shown in the bottom illustration
below.
"Route and connect
the GPS cable".
Line-up 3
4.0B Dual Band with 4.0 G-1 and
1.0/2.0 Primary
G-1
PRI
G-2
FAN UNIT
MODULAR CELL 4.0B
DUAL BAND CABINET
MODULAR CELL 1.0/2.0
PRIMARY CABINET
SMART
SWITCH
A6
RECTIFIERS
MODULAR CELL 4.0 GROWTH
CABINET
TOP
BOTTOM
G-2 4.0B with G-1
4.0 Cabinet:
J5 and
J6 ON
Note that the J7 portion
of the switch may not be
present, but if present, it
should be set to OFF.
G-1
G-2