User's Manual

RF cable connections between existing Modular Cell
cabinets and a 4.0B dual band cabinet
6- 15
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
15 MHZ INTER-FRAME CABLES: LINE-UP 4
LINE-UP
PRIMARY CABINET CONNECTION
PROCEED TO:
C
onnect the 15MHz cable to the J5 port on
the "Smart Switch" in the 3.0 primary
c
abinet as shown in the bottom illustration
below.
"Route and connect
the GPS cable".
Line-up 4
4.0B Dual Band with 4.0 G-1 and
3.0 Primary
G-2
G-1
PRI
MODULAR CELL 3.0
PRIMARY CABINET
FAN
FAN UNIT
MODULAR CELL 3.0
PRIMARY CABINET
SMART
SWITCH
MODULAR CELL 4.0
GROWTH CABINET
MODULAR CELL 4.0B
DUAL BAND CABINET
A6
RECTIFIERS
OSC 1
OSC 2
Note that the J7 por-
tion of the switch may
not be present, but if
present, it should be
set to OFF.
TOP VIEW
G-2 4.0B with G-1
4.0 Cabinet:
J5 and
J6 ON
IMPORTANT:
N
ote that the cables at
the Smart Switch
connectors J3, J4, and
J9 can become
disconnected or
damaged if care is not
taken when sliding out
the shelf.
G-1
G-2