User's Manual

6-16
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
RF cable connections between existing Modular Cell
cabinets and a 4.0B dual band cabinet
15 MHZ INTER-FRAME CABLE: LINE-UP 5
LINE-UP PRIMARY CABINET
CONNECTION
PROCEED TO:
T
he existing 15 MHz cable connection
a
t the J5 port of the Smart Switch in the
primary cabinet in the 1.0/2.0 primary
cabinet remains the same. A kit is
supplied to install a 15MHz splitter in
the
G-2 cabinet. Installation
instructions are supplied with the kit.
15MHz connections from all three
cabinets are made to this splitter as
shown in the illustration below.
"Route and connect the
GPS cable".
Line-up 5
3.0
4.0
4.0B Dual Band with 4.0 G-2,
1.0/2.0/3.0 G-1
and 1.0/2.0 Primary
5
4.0B
(DB)
G-2
G-1
PRI
G-3
4.0B DUAL BAND
G-3 CABINET
1.0/2.0 PRIMARY CABINET
4.0 G-2 CABINET
G-1
G-2
TOP
BOTTOM
SMART SWITCH
SIDE VIEW