User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

1-42

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

...........................................................................................................................................................................................................................................................

Overview of the Flexent‚ Modular Cell 4.0B cabinet

installation

FCC statements

FCC statement

Antenna installations for the Flexent Modular Cell 4.0B shall be

performed in accordance with all applicable manufacturer's

recommendations, and national laws and regulations. To ensure correct

antenna installation, the antenna installer shall perform all necessary

calculations and/or field measurements to evaluate compliance with

applicable national laws or regulations regarding exposure to

electromagnetic fields. The antenna manufacturer or supplier shall

deliver all technical data necessary to perform this compliance

evaluation (for example, antenna gain pattern, antenna dimensions,

etc.). Information on the methodology and results of the compliance

evaluation shall be available for inspection by officials of the governing

authorities.

CAUTION

Changes or modifications not expressly approved by Lucent

Technologies, Inc. could void the user’s authority to operate the

equipment.

47 CFR part 1, subpart 1

statement

Pursuant to 47 CFR Part 1, Subpart I, all installations must be evaluated

for requirements contained in Table 1 "Limits for maximum

permissible exposure" of section 1.1310.

47 CFR part 2 statement

This device complies with Part 2 of the FCC rules.