User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 7
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Set the 1/2-inch drop-in
anchor (if applicable)
Important! If using “12-mm expansion stud anchors” with
mounting bases, skip to Set the 12-mm expansion stud anchors for
mounting bases on Page 2 - 9 and continue the installation from
that point.
Important! If using “12-mm expansion stud anchors” without
mounting bases, skip to Cabinet handling on Page 2 - 21 and
continue the installation from that point.
Use the following procedure to install the 1/2-inch drop-in anchor.
................................................................................................................................
............................................
1 Tap in the anchors.
................................................................................................................................
............................................
2 Set the anchors using the setting tool. Refer to the figure on Page 2-8.