User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 15
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
6 Repeat Steps 1 through 4 for the second battery cabinet mounting base
and then attach it to the first battery cabinet mounting base using the four
bolts, flat washers and lock washers supplied. Refer to the figure on
Page 2-14.
................................................................................................................................
............................................
7 Tighten each of the twelve zone 3 and 4 nuts to 58 ft-lb (79 Nm) as
shown below.
THREADED
ROD
PLATE
WASHER
NUT
FLAT
WA SH ER