User's Manual

2-24
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
Unpack the cabinet
Use the following procedure to unpack the cabinet.
................................................................................................................................
............................................
1 Make note of the "TIP N TELL" indicator on the package to see if the
cabinet was mishandled or tipped during shipment.
................................................................................................................................
............................................
2 Remove the bubble wrap.
Important! Keep cabinet upright.
................................................................................................................................
............................................
3 Check cabinets for signs of damage.
................................................................................................................................
............................................
4 Report damage as required.
................................................................................................................................
............................................
5 Secure mounting hardware and the instructions sheet inside of each
cabinet. These sheets provide additional instructions for handling the
E ND OF STEPS
................................................................................................................................
.............................................
cabinets.
Install the lifting eye bolts
Use the following procedure to install lifting eye bolts, if available.
WARNING
................................................................................................................................
.............................................
Equipment damage
When performing the next step, the nut on the top of the
cabinet must be held in position while the lifting eye bolt is
tightened. Otherwise, the nut can become loose and result in
water leakage into the cabinet. Do not overtighten the lifting
eye bolt.
.....
......................................................................................................................................
1 At the applicable cabinet, install the four lifting eye bolts for handling
and placing the cabinet.