User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 27
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Transport cabinet
Use the following steps to transport the cabinet after attaching it to the
derrick.
CAUTION
................................................................................................................................
.............................................
When moving a cabinet in the following procedures, do not tilt
the cabinet beyond 30 degrees. Do not stand under the cabinet.
1 Tie a rope from one end of the pallet, with sufficient length to hold and
guide the cabinet while it is transported from the truck. The rope
prevents the cabinet from tilting or swinging.
................................................................................................................................
............................................
2 Lift the cabinet carefully from the truck, keeping the boom line tight to
prevent the cabinet from tipping while it is moving.
................................................................................................................................
............................................
E ND OF STEPS
................................................................................................................................
.............................................
3 Slowly place the cabinet on the ground.
Remove cabinet from pallet
Use the following procedure to remove the cabinet from the pallet.
................................................................................................................................
............................................
1 Make sure that the boom line is tight.
................................................................................................................................
............................................
2 Open the front door.
................................................................................................................................
............................................
3 Use a 3/4-inch deep socket and ratchet to remove the four bolts that hold
the cabinet to the pallet.
Important! Do not attempt to move the cabinet manually.
................................................................................................................................
............................................
E ND OF STEPS
................................................................................................................................
.............................................
4 Carefully lift the cabinet and remove the pallet.