User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

Modular Cell 4.0B and WNG24-BC cabinet handling,

placement, anchoring and grounding

2- 31

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

............................................................................................................................................................................................................................................................

Move/lift the primary

cabinet into position

Use the following procedure to move/lift the cabinet into position.

WARNING

................................................................................................................................

.............................................

Personnel injury or equipment damage

Cabinets are too heavy to move without appropriate lifting

devices.

When moving the cabinet, always use appropriate lifting

devices and a sufficient number of personnel.

1 If installing directly to a concrete surface, remove tape and any debris

covering the anchor holes.

................................................................................................................................

............................................

2 Place cabinet into position.

• On mounting bases or

• On concrete, over the anchor holes or the set anchors

................................................................................................................................

............................................

3 Open the front door of the cabinet to view the front mounting holes.

Note that the key must remain in the latch to open the door.

................................................................................................................................

............................................

4 Align the cabinet mounting holes with the set anchors or anchor holes,

E ND OF STEPS

................................................................................................................................

.............................................

as applicable.