User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 43
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Important! It is preferred that the screws be installed from
inside the first battery cabinet so that all of the nuts are inside of
the second battery cabinet when they are tightened in the next
step.
................................................................................................................................
............................................
2 Attach the second battery cabinet to the first battery cabinet at the cable
support. Use the eight sets of hex-head cap screws, plain washers, lock
washers and nuts. Refer to the figure on Page 2-43.
Important! When performing the next step, the nuts must be
tightened to a point that no gasket material is visible around the
cable support.