User's Manual

2-44
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
................................................................................................................................
............................................
3 Refer to the figure below and tighten the cable support nuts using the
tightening sequence shown.
1
2
3
4
5
6
7
8
9
10
NOTE:
Nuts 1 through 8 are threaded on
bolts coming from the first battery
cabinet. Screws 9 and 10
were installed to hold the cable
guide to the second battery
cabinet during the connection of
the cabinets.
FRONT
INSIDE VIEW