User's Manual

1-38
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
Overview of the Flexent‚ Modular Cell 4.0B cabinet
installation
WARNING
Beryllium Oxide Poisoning Hazard!
The transmitter units include components which contain
beryllium oxide (BeO). In this form, BeO ceramics do not
constitute a hazardous material as long as this material is not
destroyed by external mechanical forces.
In the event that repair work is carried out by the customer or
by third parties, the following regulations must be observed:
• Applicable version of the Regulation on Hazardous
Materials in the Workplace
• Appropriate accident prevention regulations
The following must be specifically observed:
• Do not eat, drink, or smoke in areas where work is
taking place on BeO ceramic components.
• Wash your hands carefully under running water after
working with BeO ceramic components.
If the following symptoms occur, contact a physician:
• Irritation of the respiratory organs
• Difficulty breathing or skin irritation
CAUTION
Condensation may cause a short circuit!
Sudden changes in the weather may lead to the formation of
condensation on components. Operating the unit when
condensation moisture is present can destroy the unit.
Units which show signs of condensation must be dried before
power is applied.