User's Manual

Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding
2- 47
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
3 Level the cabinet (as required) using the supplied shims.
Important! If the cabinet door does not align properly when
closed, the cabinet must be re-leveled until correct door alignment
is achieved.
................................................................................................................................
............................................
4 Verify that the cabinet door aligns properly when closed.
................................................................................................................................
............................................
E ND OF STEPS
................................................................................................................................
.............................................
5 Do not tighten the anchor bolts or nuts at this time.