User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

A- 12

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

...........................................................................................................................................................................................................................................................

................................................................................................................................

............................................

7 Locate the conduit and associated parts used for routing of cables to the

first battery base module. Refer to the figure on Page A - 12.

................................................................................................................................

............................................

8 Thread a lock nut completely onto one of the two supplied chase nipples.

Refer to the figure on Page A - 12.

................................................................................................................................

............................................

9 From the inside of the battery base module insert a chase nipple with

locknut through the left side frame. Refer to the figure on Page A - 12.

................................................................................................................................

............................................

10 From the outside of the battery base module place a sealing ring, “box

side” facing right, onto the protruding chase nipple. Refer to the figure

on Page A - 12.

................................................................................................................................

............................................

11 Thread the conduit onto the chase nipple and hand tighten. Refer to the

figure on Page A - 12.

................................................................................................................................

............................................

12 From the inside of the battery base module, tighten the locknut against

the side frame. Refer to the figure below.

CHASE

NIPPLE

SEALING RING

CONDUIT

FIRST OR SECOND

BATTERY BASE

MODULE

LOCKNUT

FRONT VIEW - RIGHT SIDE INSTALLIATION