User's Manual

A- 13
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
13 Place the outer frame with the conduit into position beside the Modular
Cell cabinet (or first battery base module) with the conduit against the
associated opening. Refer to the figure below.
................................................................................................................................
............................................
14 Place a sealing ring, "box side" facing left, at the left end of the conduit.
Refer to the figure below
................................................................................................................................
............................................
15 From the inside of the Modular Cell cabinet or the first battery base
module, as applicable, remove the cover plate and insert a chase nipple
with locknut through the right side frame and the sealing ring and into
the conduit. Hand tighten the chase nipple and lock nut.
CHASE
NIPPLE
CHASE
NIPPLE
SEALING RINGS
CONDUIT
LOCKNUT
MODULAR CELL
CABINET OR FIRST
BATTERY BASE MODULE
FIRST OR SECOND
BATTERY BASE
MODULE
LOCKNUT
FRONT VIEW - RIGHT SIDE INSTALLIATION