User's Manual

A- 29
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
................................................................................................................................
............................................
2 Attach one end of the supplied 300 mm (11.8- inch) internal ground
cable to the inner frame using the bolts and washers provided. Refer to
the figures below. Torque according to the table in Chapter 1.
Important! Four lifting eyebolts are provided with the inner
frame for use as lifting aids. They may be temporarily screwed
into the top of the inner frame in the locations shown in the figure
below.
................................................................................................................................
............................................
3 Install the lifting eyebolts in the locations shown in the figure below.
I
NNER
F
RAME
ATTACH INTERNAL
GROUND CABLE
HERE WITH TWO
BOLTS
INNER
FRAME
L
OCATIONS
F
OR LIFTING
EYE BOLTS
(2 of 4)