User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsUMTS-CDMA Transceiver System (850)

A- 36

Lucent Technologies – Proprietary

See notice on first page

401-703-454

FOA Draft Issue 1

January, 2006

...........................................................................................................................................................................................................................................................

How to identify and route the cables

from the Modular Cell cabinet to the

first EZBFo battery base module

Overview

Purpose

This section identifies and routes the cables necessary to interface the

first EZBFo battery base module to the Modular Cell 4.0B cabinet.The

installer will identify the correct ends of each cable to route, and route

all cables from the from Modular Cell 4.0B cabinet to the EZBFo

battery base module. A wiring overview is provided.

Instructions are given for right-hand (primary cabinet) installation. Left

hand installation (4.0B Dual Band cabinet) is the same except for the

routing of the cables into and through the 4.0B Dual Band cabinet. This

alternate routing is provided.

Contents

Step-by-step instructions are provided for the following tasks:

Wiring overview A - 37

How to identify the Modular Cell to first EZBFo battery base

module cables

A - 39

How to identify the connectors and route the cables from the

Modular Cell 4.0B cabinet to the first EZBFo battery base

module

A - 42