User's Manual

A- 42
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
How to identify the connectors and route the cables from the Modular
.............................................................................................................................................................................................................................................................
Cell 4.0B cabinet to the first EZBFo battery base module
Overview
This module provides instructions for routing the first EZBFo battery
base module cables from the Modular Cell 4.0B cabinet. The parts
required are shipped separate from the EZBFo battery base module.
Instructions are given for right-hand (primary cabinet) installation. Left
hand installation (4.0B Dual Band cabinet) is the same except for the
routing of the cables into and through the 4.0B Dual Band cabinet.
Refer to the figure on Page A - 5. This alternate routing is provided.
Important! DC cables must be routed last. They will be routed and
individually taped at the Modular Cell cabinet end but will not be
connected in the Modular Cell cabinet at this time
Identify the individual cable connectors and their terminations
on each end
A - 43
Route the cables through the conduit into the first battery base
module
A - 45