User's Manual

A- 50
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
................................................................................................................................
............................................
7 Strip the individual wires to expose 5/8-inch.
................................................................................................................................
............................................
8 Fully loosen the applicable input screws. and connect the AC input
wires to the terminal block. Refer to the figure below for connection
references.
................................................................................................................................
............................................
9 Torque the screws to 1.5 to 1.8 Nm (1.1 to 1.3 ft.- lb.).
FRONT
VIEW
L2/N
L1/L
AC INPUT (BOTTOM)
HEATER PAD
AC CONNECTIONS
FRONT VIEW
LEFT SIDE VIEW
OUTPUT
SIDE
(TOP)
INPUT
SIDE
(BOTTOM
)
AC
OUTPUT
WIRE
AC INPUT
WIRE
SCREWS
INPUT
SIDE
SCREWS
RED
BLACK
GREEN