User's Manual

7-18
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
Finishing the installation
Replace / close all access
panels and doors
Use the following procedure to replace or close all access panels and
doors.
................................................................................................................................
............................................
1 Verify that the EFIT and HPDA are closed and secured.
................................................................................................................................
............................................
2 Inspect for and remove all tools, materials, and parts.
................................................................................................................................
............................................
3 Check that the cabinet lifting eye bolts have been removed and that the
top solar shield has been installed.
Important! If not, refer to Chapter 2 for specific instructions.
................................................................................................................................
............................................
4 Verify that all power connections are installed and secure.
Important! Skip the next step if installing a primary cabinet
only.
................................................................................................................................
............................................
5 Verify that all RF connections between the Modular Cell 4.0B primary
cabinet and the Modular Cell 4.0B dual band cabinet are installed and
secure.
Important! When performing the next step, the door must be
properly aligned. If not, refer to Chapter 2 to re-level the cabinet
and/or adjust the door.
................................................................................................................................
............................................
6 Close and secure the cabinet door and panels.
Important! Do not replace any panels or close the door if
installing a battery cabinet at this time, since DC and AC cables
remain to be attached. Do not replace any panels if using external
power, since DC and AC cables remain to be attached.
................................................................................................................................
............................................
E ND OF STEPS
................................................................................................................................
.............................................
7 Turn the appropriate main panel circuit breakers ON.