User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsRRH2X60-850

Strut mounting hardware

The following photo illustrates the hardware that is required to mount a strut on a

concrete wall and the RRH to the strut.

Steps to install unistrut

CAUTION

Equipment damage hazard

Damage to equipment may result.

Prior to drilling holes in a wall, consult with the customer as to the location of gas, water,

and electrical pipes or conduits to minimize accidental hazard and equipment damage.

Also consult with the building engineer as to local code requirements and wall loading

information.

Proceed as follows to install the Unistrut.

...................................................................................................................................................................................................

Determine the layout of the struts that will support the RRH.

...................................................................................................................................................................................................

Place the top strut on the wall and make sure that the strut is level. Use the holes at the

ends of the strut as a template to mark the positions of the holes to be drilled in the wall.

Site requirements Site requirements for wall mount installations

....................................................................................................................................................................................................................................

Alcatel-Lucent RRH 2X60W

NN-20500-305 UA08.1

Issue 0.7 November 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

5-11

RELIMINARY