Operation Manual

16
3.9
Speed dial
3.10
Making a call-back request (Single-line terminal only)
When you call, your caller does not answer or is busy
3.11
Calls log
All incoming, outgoing, missed or unanswered calls are displayed in the call log.
3.12
Activate/deactivate voice frequency
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an automated
attendant or a remotely consulted answering machine.
This feature allows you to associate a contact to a key on the keypad. Therefore, pressing and
holding on this key will automatically start the call to the associated contact. This feature allows to
associate a contact or a feature code to a key on the kepypad. Pressing and holdingon this key will
automatically start the call to the contact or will activate the associated feature.
Menu Access MENU
Select Access your personal directory
More
Speed dial
Select
Select one of your contacts
Add
Replace
Delete
Select the key to programme (0 to 9).
As appropriate, you can add, replace or delete the number or feature associated with
the key.
Back to homepage
Enter the feature code: Call-back request:
When a caller requests a callback, you can consult by hooking off the set and dialing the caller s
callback requests consultation code.
This feature is available only if supported by your communication system. Contact your administrator
to determine if you can use this feature.
Call Access to the calls log
All incoming, outgoing, missed or unanswered calls are displayed in the call log
Select the desired log:
All calls
Answered calls
Sent calls
Missed calls
Select the recipient from the call log
To see your caller details
More
From the call log, you can save the caller in your contacts, send a message to the caller,
etc.
The call log can also be accessed from the menu .
During a conversation
Press the star key (hold down for a few seconds).
The function is automatically cancelled when you hang up.
CLR