Operation Manual

8AL90314ENAAed01 15 /70
Installing or replacing the Bluetooth® handset battery
The battery recharges when the Bluetooth® handset is on its base.
1.7 Install a comfort wired handset
You can install a wired handset in place of the Bluetooth® Wireless Handset.
 Remove the rubber
 Plug-in the wired handset to the appropriate connector
(refer to phone description).
Make sure you position the cable correctly in the
compartment intended for that purpose:
Switch off the Bluetoothø Wireless Handset (press and hold
the On/Off hook key until you hear two distinct tones).
1.8 HDMI connector
Your set is equipped with an HDMI 1.4 output for a better video experience.
The 8088 Smart DeskPhone can be connected to a large screen or video projector. Moreover, an
external camera can be connected to the phone to broadcast the entire room. Your deskphone can
easily find its place in a meeting room.
There are two ways to use the HDMI connector:
 Broadcast the video conversation (HD capability).
 Broadcast the entire display of the phone.
Your set has to be connected to the appropriate equipment.
Lift up the battery cover
Slide out the battery holding
part