User Guide

OmniAccess 3500 Nonstop Laptop Guardian Gateway Installation Guide
ATTACH BRACKETS TO REAR POSTS
1. Attach a nut bar (Figure 7, C) on the inside of the two rear rack posts using screws
(A). Do not completely tighten the screws—leave them loose enough to allow
insertion of the brackets in step 2.
2. Insert the slotted foot of a rear bracket (B) between each nut bar and post.
3. Align the face of the bracket foot with the edge of the rack post and firmly tighten
the screws.
Figure 7: Attaching a rear bracket to a rear post
12