OmniAccess 3500 Nonstop Laptop Guardian Release 1.2 Card Quick Start Guide Document Version: 25.03 Part Number: 032318-10 Rev B Published: 12.18.
Alcatel-Lucent Proprietary Copyright © 2007 Alcatel-Lucent. All rights reserved. This document may not be reproduced in whole or in part without the express written permission of AlcatelLucent. Alcatel-Lucent ® and the Alcatel-Lucent logo are registered trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. Welcome Welcome to the Quick Start Guide for Release 1.2 of the OmniAccess 3500 Nonstop Laptop Guardian (NLG) card.
• 3G Modem Push Button: Briefly push the button down with the tip of a ballpoint pen to toggle the power state of the 3G modem. You must use this button to power off the modem when regulatory requirements apply, such as when the airplane you have boarded is taking off or landing. • Master Power Switch: Using the tip of a paper clip, slide the switch towards the connector end of the card to shutdown the card and towards the antenna end of the card to restart it.
Installing the OmniAccess 3500 NLG Software and Card Warning: Do not insert your card without first downloading the OmniAccess 3500 NLG client software to your laptop and starting the installation procedure. If you have not been instructed otherwise by your IT administrator, follow the first six steps below to download the OmniAccess 3500 NLG client software to your laptop: 1. Navigate your browser to the following URL: http://www.nonstopguardian.com. 2.
There is no limit to the number of times that the software can be downloaded with a given software distribution key. The following steps are the same irrespective of the method used by your enterprise for distribution of the OmniAccess 3500 NLG client software: 7. After you click Run or launch the executable file on your laptop an Alcatel-Lucent OmniAccess 3500 NLG Client License window appears. 8. Read the agreement and click Yes to accept the agreement. 9.
10. Click Next to continue. 11. Enter your name and your company’s name on the NLG Client Software Installation (NLG Client user register details) window.
12. Click Next to continue. 13. A Setup Status window appears, with visual indication of the progress made in the installation of the client software. 14. A Software Installation warning window also appears. (If this window does not appear, you will see an icon on the bottom toolbar. Click the icon to display the window on the screen.) Click Continue Anyway on the warning window.
15. Click Continue Anyway on the six Hardware Installation warning windows that follow. 16. An OmniAccess 3500 NLG Client Setup window appears, asking if you want to restart your computer. 17. Select Yes, I want to restart my computer now and click Finish to restart your laptop now. Your laptop will automatically reboot. 18. After the laptop reboots, insert the card. Warning: Use care when inserting the card into your laptop. The card inserts only one way.
20. Select No, not this time and click Next. 21. On the next window, select Install the software automatically and click Next. 22. Click Continue Anyway through the multiple warning windows. 23. Click Finish. An OmniAccess 3500 NLG icon appears on your desktop. 24. After waiting a few minutes for processing to finish, double-click the OmniAccess 3500 NLG icon. The OmniAccess 3500 NLG Client window appears. 25. On the NLG menu, click Configure.
26. A Configure Client window appears. 27. Click Yes to activate the card. The Configure – Enter Details window appears. 28. Browse to the locations of the certificate files and user key that you obtained from your administrator. Click Configure. Note: Be sure to import the correct certificate files, since activating the incorrect files can cause problems with the installation. You should delete the certificates and user key from your PC once the card is activated. 29.
30. Type your phone number and Mobile Subscriber ID (MSID) number. Click Activate Modem. The Config Modem Activation window appears. 31. Type your Master Subsidy Lock (MSL) number (provided by your carrier). Click Start Modem Activation. 32. A window containing a status bar appears, followed by an Activation Completed window. Click OK. 33. Installation is complete. If your laptop has network access available, you are automatically connected to your corporate network.
in the laptop, connect the laptop to a power source, and leave the laptop powered up for at least 2 hours. Handling the Card Your OmniAccess 3500 NLG card must be plugged into your laptop in order for you to be able to use the laptop. To remove your card from the laptop, gently pull the card out of its slot using the grippers on the side of the card.
