User Guide

OmniAccess 3500 Nonstop Laptop Guardian Administration Guide
o Connectivity Timeout (sec): Total laptop power-on time during which the
laptop is allowed to work without VPN tunnel to the OmniAccess 3500 NLG
gateway. The corresponding timer is reset every time the IPsec tunnel to the
gateway is established while the laptop is powered on. A warning pops up on
the laptop’s screen five minutes before expiration of the connectivity timeout.
If the timeout expires, the laptop locks and can only be unlocked with an OTP
received from the IT helpdesk.
o OTP Valid Time (sec): Amount of time that the laptop will remain unlocked
after the one-time password has been successfully entered. After this time
interval expires, all tamper checks are enabled again.
o Card ID: The Electronic Serial Number (ESN) of the card assigned to this user.
One card only can be assigned to a given user.
o Laptop ID: The laptop assigned to this user. One laptop only can be assigned to
a given user.
o User Group: The user group to which the user belongs. A given user can belong
to only one user group.
o Certificate ID: The identifier of the Digital Certificate that is used in the
activation of the card. The identifier must be expressed in the format:
<CN=value>, where CN stands for common name and value is the common name
of the certificate (available in the Subject field of the certificate). Please note
that this parameter is case-sensitive.
o License ID: Select a license name from the pull-down menu. The user can
connect to the enterprise between the start and end dates specified in the
license you have selected.
3. Click Save.
28