User Guide

OmniAccess 3500 Nonstop Laptop Guardian Administration Guide

The following gateway information objects can be accessed upon selection of the

<Configure Advanced Settings> tab:

o Connection Manager – Settings — [Gateway|Configure Advanced Settings],

[Configure:], [r]

Objects needed for configuration of the remote access connections.

− Address Pool — [Gateway| Configure Advanced Settings|Gateway

Configure:-> Address Pool Information], [rw]

Sets of IP addresses from which the OmniAccess 3500 NLG gateway draws

the pair of VPN addresses that it assigns to the OmniAccess 3500 NLG card

and associated laptop upon establishment of the IPsec tunnel. The

addresses for the card and for the laptop are drawn from different, disjoint

sets. Multiple sets can be assigned to the cards (Card sets) and to the

laptops (Laptop sets). The address sets are expressed in the format <IP

address>, <Netmask>, as in <10.1.1.1>, <255.255.255.0>. The <IP Address>

value can also be expressed as a range (as in <10.1.1.1 – 10.1.1.255>) or as

a host (as in <10.1.1.1/24>). The <Netmask> value must be specified in all

cases. The <Type> value designates the assignment of the IP address set to

the OmniAccess 3500 NLG cards (<Card>) or to the laptops (<Laptop>).

Each address pool requires the configuration of the following set of

parameters:

 IP Address — The IP address from which the gateway draws the pair of

VPN addresses it assigns to the card and to the laptop upon

establishment of the IPsec tunnel.

 Netmask(x.x.x.x) — The Netmask address used to designate the IP

subnet from which the gateway draws the pair of VPN addresses it

assigns to the card and to the laptop upon establishment of the IPsec

tunnel.

 Type — Select <Card> or <Laptop> from the drop-down menu.