Network Router User Manual

Connecting the System to the Network

Except on the first page, right running head:

Heading1 or Heading1NewPage text (automatic)

Alcatel-Lucent

Beta Beta

OmniAccess 740 Hardware User’s Guide

CONNECTING THE SYSTEM TO THE NETWORK

This section details the procedure to connect to your OA-740 through the internal

or external network.

CONNECTING TO INTERNAL NETWORK

To access the OA-740 through hosts in internal network/LAN, you can use the

following:

• Accessing OA-740 Through GUI

• Connecting Through Telnet

• Connecting Through SSH

CCESSING OA-740 THROUGH GUI

Follow the procedure given below to access and configure the OA-740 through a

GUI.

Note: To access the OA-740 through the GUI, an IP interface must be configured in your

system.

Step 1: Configure IP address of an interface.

To configure an IP address of a given interface, follow the steps detailed in the

“Accessing OA-740 Through CLI” section of this document.

Step 2: Open a Web browser from your PC.

Step 3: In the address bar/field, type the IP address of the interface and press the

Enter key.

Example:

http://<ip address>

http://192.168.1.1/24

The login page for the Web GUI is displayed in the browser window.

Step 4: Enter the user name and password, and press the Enter key. This will

launch a web interface to configure your OA-740.

For further configuration of your OA-740, refer to the OmniAccess 700 Web GUI

User Guide provided in the OA-740 Documentation CD.