Handbuch OmniTouch 4135 IP DEUTSCH
Das OmniTouch 4135 IP ist mit OmniSound® 2.0 ausgerüstet, das eine noch bessere Tonqualität liefert. Wie OmniSound® nutzt auch OmniSound® 2.0 Full-Duplex, ein Mikrofon mit omnidirektionaler Aufnahmecharakteristik und drei Lautsprecher für eine optimale Tonqualität. Neu bei OmniSound® 2.0 sind „noise suppression“ für die Unterdrückung störender Hintergrundgeräusche, „wideband voice“ für 7 kHz bei VoIP-Gesprächen und ein „Equalizer“ für die individuelle Klangregelung während der Telefonkonferenz.
INHALT Beschreibung 2 Allgemeines............................................ 2 Pflege..................................................... 2 Anschluss............................................... 2 Tastenblock............................................. 4 Display................................................... 5 Navigation und Auswahl in den Menüs....... 6 Teilnehmer einer Konferenzgruppe anzeigen................................................21 Eine neue Konferenzgruppe anlegen.........
BESCHREIBUNG ALLGEMEINES Das OmniTouch 4135 IP ist ein Konferenztelefon für die IP-Telefonie mit vielen innovativen Funktionen: • OmniSound® 2.
BESCHREIBUNG Lautsprecher Mikrofon Display Tastenblock Leuchtanzeigen Schacht für SDSpeicherkarte Leuchtanzeigen Blinkt blau Eingehende Anrufe Leuchtet blau Gespräch wird geführt Blinkt rot Warteposition, Mikrofon und Lautsprecher ausgeschaltet Leuchtet rot Stummschaltung, Mikrofon ausgeschaltet Buchse für Netzwerkkabel Buchse für Zusatzmikrofon AUX-Buchse Anschluss für Sicherungskabel Buchse für Stromversorgung Buchse für Zusatzmikrofon 3
BESCHREIBUNG TASTENBLOCK PFEIL NACH UNTEN Navigieren in Menüs, Anzeige der Gesprächsliste MENU, Menü für Einstellungen OK Ja/Wahl bestätigen C Nein/Abbrechen/ Zurück, Gesprächsaufzeichnung Lautstärke erhöhen Antworten/neue Verbindung herstellen Auflegen/Verbindung abbrechen Lautstärke reduzieren KONFERENZ Automatischer Anruf von Konferenzgruppen MUTE (Stummschaltung) HOLD Warteposition PFEIL NACH UNTEN Navigieren im Menü, Anzeige der Gesprächsliste Alphanumerische Tasten, Telefonbuch Telefonbu
BESCHREIBUNG DISPLAY Ruheposition (Hörer aufgelegt) Drücken Sie , um diese Anzeige zu erhalten. Datum Uhrzeit Displaytext (kann geändert werden) Registriert Nicht registriert Kontoname (kann geändert werden) Gesprächsposition (Hörer abgenommen) Drücken Sie , um diese Anzeige zu erhalten.
BESCHREIBUNG Leitungsmenü Mit dem Leitungsmenü können individuelle Leitungen gesteuert, in Warteposition geschaltet, zurückgeholt und getrennt werden. Die (Konferenz) Taste schaltet während eines laufenden Gesprächs zwischen dem Verbindungsbildschirm und dem Anschlussmenü um. Fas Leitungsmenü kann während eines Gesprächs auch durch Drücken von MENU > ANSCHLUSS aufgerufen werden.
BESCHREIBUNG Sie können eine Menüalternative direkt öffnen. Hierzu drücken Sie die Zifferntaste, die der Position der Alternative im Menü entspricht (beispielsweise 2, um das TELEFONBUCH zu öffnen, und danach 3, um KONTAKT ÄNDERN zu wählen). Schreibweise in den Anleitungen In den Anleitungen steht MENU > EINSTELLUNGEN (6) für folgende Einzelschritte: Drücken Sie die Taste MENU.
ANRUFE ENTGEGENNEHMEN UND TÄTIGEN ANRUFE ENTGEGENNEHMEN Ein Anrufsignal ertönt und die blauen Anzeigen blinken. Drücken Sie , um den Anruf entgegenzunehmen. Die Anzeigen leuchten blau. EIN WARTENDES GESPRÄCH ÜBERNEHMEN Wenn das Konferenztelefon während eines laufenden Gesprächs angerufen wird, ertönt das Signal für wartende Gespräche (Doppelton), der Text EINGEHENDE ANRUFE wird auf dem Display angezeigt und die blauen Anzeigen blinken. Drücken Sie , um den Anruf entgegenzunehmen.
ANRUFE ENTGEGENNEHMEN UND TÄTIGEN AUS DEM TELEFONBUCH ANRUFEN Auf Seite 16 finden Sie Informationen, wie Sie Kontakte im Telefonbuch speichern und ändern. Das OmniTouch 4135 IP unterstützt auch ein externes Telefonbuch in Form eines Katalogservers (LDAP-Server). Weitere Informationen finden Sie auf Seite 18. Drücken Sie (Telefonbuch). Das Telefonbuch wird im Display angezeigt. Die gespeicherten Namen werden in alphabetischer Reihenfolge angezeigt.
WÄHREND EINES GESPRÄCHS EINSTELLEN DER LAUTSPRECHERLAUTSTÄRKE Die Lautstärke stellen Sie mit den Tasten und ein. GESPRÄCHE VORÜBERGEHEND TRENNEN Stummschaltung Drücken Sie (Mute), um das Mikrofon auszuschalten. Die Anzeigeleuchten wechseln von blau nach rot. Ihr Gesprächspartner hört nicht mehr, was Sie sagen. Drücken Sie (Mute) um das Gespräch weiterzuführen. Warteposition Drücken Sie (Hold), um das Gespräch in Warteposition zu schalten.
GESPRÄCHE MIT MEHREREN PARTNERN TÄTIGEN Auf der nächsten Seiten finden Sie unter „TELEFONLEITUNGEN VERWALTEN“ Informationen, wie Sie bei Mehrparteiengesprächen einzelne Partner in Warteposition schalten sowie über weitere innovative Funktionen. Bei Mehrparteiengesprächen ertönt alle 10 Sekunden ein diskreter Piepton.
TELEFONLEITUNGEN VERWALTEN ZWISCHEN LEITUNGEN BEI EINER KONFERENZ HIN- UND HERSCHALTEN Nur mit einem Partner sprechen Drücken Sie die Taste (Konferenz). Das Leitungsmenü wird im Display angezeigt. Drücken Sie (Hold) . Alle Telefonleitungen werden in Warteposition geschaltet. Sie können auch die Alternative KONFERENZ AUFT. im Leitungsmenü wählen, um die Leitungen in Warteposition zu schalten. Markieren Sie einen Partner im Leitungsmenü und drücken Sie OK oder (Hold).
TELEFONLEITUNGEN VERWALTEN LEITUNG TRENNEN Sie können einzelne Leitungen während eines Mehrparteiengesprächs trennen. Drücken Sie die Taste (Konferenz). Das Leitungsmenü wird im Display angezeigt. Markieren Sie die Leitung, die Sie trennen möchten, und drücken Sie .
PROFILE Das OmniTouch 4135 IP bietet Ihnen die Möglichkeit, Kontakte im Telefonbuch und Konferenzführer mit einem Passwort zu schützen. Alle Kontakte, die in der Grundfiguration (Default) gespeichert werden, sind für alle Anwender zugänglich und können nicht durch ein Passwort geschützt werden. Alle Kontakte, die von Admin gespeichert werden, werden ebenfalls in der Grundfiguration (Default) angezeigt.
PROFILE NAME UND PASSWORT EINES PROFILS ÄNDERN Loggen Sie auf dem OmniTouch 4135 IP ein, siehe Seiten 33–34. Wählen Sie Settings > Basic. Klichen Sie auf Edit unter der Rubrik Profiles. Geben Sie einen Namen und einen PIN-Code ein. Klicken Sie auf Set und speichern Sie die Einstellungen durch Klicken auf Save. Name und PIN-Code notieren und an einem sicheren Ort aufbewahren. Der Administrator kann die Einstellungen auf null zurückstellen.
TELEFONBUCH Das Telefonbuch des OmniTouch 4135 IP bietet in jedem Anwenderprofil Platz für 1000 Rufnummern. Auf Seite 9 wird erläutert, wie Sie eine Nummer aus dem Telefonbuch anrufen. Informationen zum Schreiben von Text mit den Tasten finden Sie auf Seite 4. KONTAKT SUCHEN Für die Suche nach einem Kontakt im Telefonbuch ist am einfachsten, die Taste (Telefonbuch) zu drücken und eine alphanumerische Taste zwei Sekunden lang zu drücken (Siehe Seite 9).
TELEFONBUCH KONTAKT LÖSCHEN Wählen Sie MENU > TELEFONBUCH > KONTAKT LÖSCH. (2,4). Markieren Sie den Kontakt, den Sie löschen möchten, und bestätigen Sie mit OK. Bestätigen Sie, dass Sie den Kontakt wirklich löschen wollen, indem Sie noch einmal auf OK drücken, oder brechen Sie den Vorgang ab, indem Sie C drücken. ALLE KONFERENZGRUPPEN LÖSCHEN Wählen Sie MENU > TELEFONBUCH > ALLE LÖSCHEN (2,5).
EXTERNES TELEFONBUCH (LDAP) OmniTouch 4135 IP unterstützt ein externes Telefonbuch. Dies bedeutet, dass es mit einem Katalogserver gemäß LDAP (Lightweight Directory Access Protocol) kommunizieren kann. Ein Administrator muss das externe Telefonbuch zugänglich machen, indem er die LDAP-Funktion im OmniTouch 4135 IP aktiviert und konfiguriert.
EXTERNES TELEFONBUCH (LDAP) KONTAKTE SUCHEN UND ANRUFEN Drücken Sie (Telefonbuch) oder wählen Sie MENU > EXT. TEL.BUCH (3). Das OmniTouch 4135 IP nimmt Kontakt mit der Datenbank auf, die alle Kontakte sendet. Die ersten 20 werden im OmniTouch 4135 IP angezeigt (in der Standardeinstellung). Bitte beachten Sie, dass die Taste (Telefonbuch) das externe LDAP-Verzeichnis anstelle des internen Telefonbuchs öffnet, wenn LDAP vom Administrator aktiviert ist.
KONFERENZFÜHRER Der Konferenzführer erleichtert das Zusammenschalten von bis zu fünf Parteien inklusive des eigenen Anschlusses. Das OmniTouch 4135 IP ruft automatisch alle Teilnehmer der Konferenzgruppe an. In jedem Anwenderprofil können bis zu 20 Konferenzgruppen gespeichert werden. Bei Mehrparteiengesprächen ertönt alle 10 Sekunden ein diskreter Piepton. Informationen zum Schreiben von Text mit den Tasten finden Sie auf Seite 4. KONFERENZGRUPPEN ANRUFEN Drücken Sie die Taste (Konferenz).
KONFERENZFÜHRER Drücken Sie die Taste (Konferenz), um die Gespräche zusammenzuschalten. TEILNEHMER EINER KONFERENZGRUPPE ANZEIGEN Wählen Sie MENU > KONF.-FÜHRER > GRUPPE SUCHEN (4,1). Markieren Sie die gewünschte Gruppe und drücken Sie OK. Die Namen der Teilnehmer der Konferenzgruppe werden angezeigt. Drücken Sie C oder OK um zum Menü KONFERENZFÜHRER zurückzugehen oder MENU, um das Menü zu verlassen. Drücken Sie OK oder , um die Gruppe anzurufen.
KONFERENZFÜHRER KONFERENZGRUPPE LÖSCHEN Wählen Sie MENU > KONF.-FÜHRER > GRUPPE LÖSCHEN (4,4). Markieren Sie die Gruppe, den Sie löschen möchten, und bestätigen Sie mit OK. Bestätigen Sie, dass Sie die Gruppe wirklich löschen wollen, indem Sie noch einmal auf OK drücken, oder brechen Sie den Vorgang ab, indem Sie C drücken. ALLE KONFERENZGRUPPEN LÖSCHEN Wählen Sie MENU > KONF.-FÜHRER > ALLE LÖSCHEN (4,5).
GESPRÄCHSAUFZEICHNUNG Sie können eine Telefonkonferenz auf einer SD-Speicherkarte (Secure Digital) aufzeichnen und später wieder abspielen. Sie können sowohl laufende Gespräche aufzeichnen als auch das OmniTouch 4135 IP als Diktiergerät verwenden. Während der Aufzeichnung leuchtet ein Aufzeichnungssymbol im Display. Um die anderen Teilnehmer der Telefonkonferenz darüber zu informieren, dass eine Aufzeichnung des Gesprächs erfolgt, ertönt alle 20 Sekunden ein Ton.
GESPRÄCHSAUFZEICHNUNG GESPRÄCHSAUFZEICHNUNG ABSPIELEN Die aufgezeichnete Telefonkonferenz kann sowohl im OmniTouch 4135 IP als auch in einem Computer mit SD-Kartenleser abgespielt werden. Die Aufzeichnung erfolgt im wav-Format und kann mit einem beliebigen Mediaplayer abgespielt werden. So hören Sie die Aufzeichnung im OmniTouch 4135 IP: Wählen Sie MENU > AUFZEICHNUNG > DATEI ABSPIEL (5,1). Markieren Sie den gewünschten Ordner (Datum) und bestätigen Sie mit OK.
GESPRÄCHSAUFZEICHNUNG AUFZEICHNUNG LÖSCHEN Wählen Sie MENU > AUFZEICHNUNG > DATEI LÖSCHEN (5,3). Markieren Sie den gewünschten Ordner und drücken Sie OK. Markieren Sie die zu löschende Aufzeichnung und drücken Sie OK. Bestätigen Sie, dass Sie die Aufzeichnung wirklich löschen möchten, indem Sie auf OK drücken oder brechen Sie den Vorgang ab, indem Sie auf C drücken. ALLE AUFZEICHNUNGEN LÖSCHEN Wählen Sie MENU > AUFZEICHNUNG > ALLE LÖSCHEN (5,4).
EINSTELLUNGEN Im OmniTouch 4135 IP sind die möglichen Einstellungen in zwei Gruppen gegliedert: Basic und Advanced. Um zu den erweiterten Einstellungen zu gelangen, müssen Sie den PIN-Code für Admin eingeben. Die Einstellungen erfolgen am einfachsten mit einem Computer und der Webschnittstelle im OmniTouch 4135 IP, siehe Seite 33. GRUNDEINSTELLUNGEN Sprache wählen Wählen Sie MENU > EINSTELLUNGEN > GRUNDEINST. > SPRACHE (6,1,1). Wählen Sie die gewünschte Sprache und bestätigen Sie mit OK.
EINSTELLUNGEN Einstellungen für den Anschluss externer Geräte (Aux) Das OmniTouch 4135 IP kann an ein schnurloses Headset oder an eine externe Lautsprecheranlage (PA) angeschlossen werden. Für letzteres ist eine PA-Interface-Box als Zubehör erforderlich. Wählen Sie MENU > EINSTELLUNGEN > GRUNDEINST. > AUX-BUCHSE (6,1,5). Wählen Sie die Alternative PA, um die Funktion für externes Mikrofonmischpult und Lautsprechersystem zu aktivieren.
EINSTELLUNGEN Text im Display ändern Sie können den Text ändern, der im Bereitschaftsmodus im Display des OmniTouch 4135 IP angezeigt wird. Wählen Sie MENU > EINSTELLUNGEN > GRUNDEINST. > DISPLAYTEXT (6,1,8). Löschen Sie den vorhandenen Text mit der Taste C und geben Sie den gewünschten Text ein. Bestätigen Sie mit OK. Zurückstellung Damit werden die Anwendereinstellungen des aktuellen Anwenderprofils auf die Werkseinstellungen zurückgestellt.
EINSTELLUNGEN Einstellung des Mikrofons über die PA-Anlage Die Menüalternative PA setzt voraus, dass PA aktiviert ist. Wählen Sie MENU > PA > PA MONITOR. Stellen Sie den Mikrofonpegel am Mischpult so ein, dass der im Display angezeigte Wert bei einem normalen Gespräch bei 10–12 liegt. Manuelle Einstellung der PA-Kalibrierung Die Duplex-Funktion des Konferenztelefons kann bei einem Anschluss an eine PAAnlage kalibriert werden.
EINSTELLUNGEN SYSTEM Das Systemmenü kann für einen manuellen Neustart und die Rückstellung verwendet werden. Neustart des Telefonprogramms Damit werden die Telefonfunktionen neu gestartet, dieser Vorgang dauert weniger als 30 Sekunden. Wählen Sie MENU > SYSTEM > RESTART (7,1). Bestätigen Sie, dass Sie den Neustart wirklich durchführen wollen, indem Sie noch einmal auf OK drücken, oder brechen Sie den Neustart ab, indem Sie C drücken.
EINSTELLUNGEN STATUS ÜBERPRÜFEN Das Statusmenü kann bei der Fehlersuche verwendet werden. Nur der Administrator kann diese Einstellungen ändern. Was die anderen Einstellungen beinhalten, wird in „Installation and Administration of OmniTouch 4135 IP“ erläutert. Konto Zur Kontrolle der Kontoeinstellungen für SIP-Konto. Wählen Sie MENU > STATUS > KONTEN > KONTO (8,1,1).
EINSTELLUNGEN NAT Traversal Zur Kontrolle, ob die Adressenkonvertierung aktiviert ist. Dies kann erforderlich sein, wenn das Telefon hinter einer Firewall installiert ist. Wählen Sie MENU > STATUS > NAT TRAVERSALE (8,3). Dies zeigt den Status für: - STUN - TURN - ICE Media Zur Kontrolle der Präferenzen der Ton-Codierung und DTMF-Signalisierung. Wählen Sie MENU > STATUS > MEDIUM (8,4). Dies zeigt den Status für: - CODEC-PRIORITÄT - VAD - DTMF-SIGNAL - SICHER RTP - SICHERE SIGNALIS.
WEBSCHNITTSTELLE VERWENDEN Mit einem Browser und Computer, der an das selbe Netzwerk angeschlossen ist, können Kontakte, Konferenzgruppen verwaltet und Einstellungen des OmniTouch 4135 IP vorgenommen werden. Die Wahl der Sprache im OmniTouch 4135 IP hat keine Auswirkungen auf die Webschnittstelle, die nur auf English zur Verfügung steht. Die Gesprächsaufzeichnung kann aus Sicherheitsgründen nur direkt am OmniTouch 4135 IP gesteuert werden.
WEBSCHNITTSTELLE VERWENDEN AUF DEM OMNITOUCH 4135 IP EINLOGGEN 34 Schreiben Sie die Netzwerkadresse des Telefons in das Adressenfeld des Browsers. Wählen Sie Default oder ein leeres Anwenderprofil unter Profile und geben Sie den PIN-Code ein. Der Standard-Code lautet 0000.  Sie können ein eigenes, mit persönlichem Passwort geschütztes Telefonbuch anlegen, indem Sie ein Anwenderprofil verwenden.
WEBSCHNITTSTELLE VERWENDEN TELEFONBUCH VERWALTEN Wählen Sie Phone Book. Hier können Sie Kontakte hinzufügen, ändern und löschen. Sie können außerdem bereits vorhandene Kontakte importieren. Wenn ein Kontakt im Telefonbuch eingetragen ist, wird der Name im Display des Telefons angezeigt, wenn Sie den Kontakt anrufen oder der Kontakt sie anruft. Einen Kontakt hinzufügen Geben Sie den Namen des Kontakt ein unter Name:  Informationen zur URI finden Sie auf den Seiten 45–46.
WEBSCHNITTSTELLE VERWENDEN Kontakt bearbeiten Klicken Sie auf Edit contact nach dem Kontakt, den Sie ändern möchten. Bearbeiten Sie den Kontakt und klicken Sie danach auf Save contact. Kontakt löschen Klicken Sie auf Erase contact nach dem Kontakt, den Sie löschen möchten. Bestätigen Sie, dass Sie den Kontakt löschen möchten. Sie können auch alle Kontakte in einem Schritt löschen. Hierzu klicken Sie auf Erase all.
WEBSCHNITTSTELLE VERWENDEN und die Telefonnummer - immer ein Kontakt in einer Zeile. Geben Sie der Datei vor dem Speichern den Appendix csv statt txt. Normalerweise lassen sich Kontaktbücher, die Sie bereits im Rechner haben, im csv-Format exportieren. Klicken Sie auf Durchsuchen… unter der Rubrik Import im Webfenster. Wählen und öffnen Sie ihre csv-Datei. Klicken Sie auf Import. Der Name ist auf 15 Zeichen begrenzt, da das Display des OmniTouch 4135 IP nicht mehr Zeichen darstellen kann.
WEBSCHNITTSTELLE VERWENDEN KONFERENZFÜHRER VERWALTEN Wählen Sie Phone Book > Conference guide. Hier können Sie Konferenzgruppen hinzufügen, ändern und löschen. Sie können außerdem bereits erstellte Gruppen importieren. Wenn ein Kontakt im Telefonbuch enthalten ist, wird dessen Name im Display des Telefons angezeigt, wenn die Verbindung hergestellt ist. Eine neue Konferenzgruppe anlegen Den Namen der Gruppe, die Namen der Teilnehmer und deren Telefonnummer eingeben.
WEBSCHNITTSTELLE VERWENDEN Konferenzgruppe löschen Klicken Sie auf Erase group bei der Gruppe, die den Sie löschen möchten. Bestätigen Sie, dass Sie die Gruppe löschen möchten. Sie können auch alle Gruppen in einem Schritt löschen. Hierzu klicken Sie auf Erase all groups. Konferenzgruppen importieren Sie können Konferenzgruppen aus einer mit Kommata getrennten Textdatei (csv) importieren. Weitere Informationen hierzu finden Sie unter „Kontakte importieren“ auf Seite 36.
WEBSCHNITTSTELLE VERWENDEN GESPRÄCHSLISTE KONTROLLIEREN Die Gesprächsliste zeigt in zeitlicher Reihenfolge nacheinander eingegangene, getätigte und versäumte Gespräche bzw. Anrufe. 40 Wählen Sie Call list > Recent. Wählen Sie eine der Registerkarten Incoming, Outgoing oder Missed um die Liste zu sortieren.
WEBSCHNITTSTELLE VERWENDEN GRUNDEINSTELLUNGEN Die Einstellungen gelten nur für das Anwenderprofil, das Sie beim Einloggen gewählt haben. Wählen Sie Settings > Basic. PIN-Code und Profilnamen ändern Der PIN-Code kann von der Standardeinstellung geändert werden, um die Einstellungen zu schützen. Klichen Sie auf Edit unter der Rubrik Profiles. Geben Sie einen neuen PIN-Code ein. Der Code kann acht Ziffern enthalten. Sie können auch den Namen des Anwenderprofils ändern.
WEBSCHNITTSTELLE VERWENDEN Anrufsignallautstärke ändern Wählen Sie die gewünschte Lautstärke unter der Rubrik Ring level und klicken Sie auf Save. Tastenton ändern Wählen Sie On oder Off unter der Rubrik Key tone und klicken Sie auf Save. Aufzeichnungsanzeige ändern Um die anderen Teilnehmer der Telefonkonferenz darüber zu informieren, dass eine Aufzeichnung des Gesprächs erfolgt, ertönt alle 20 Sekunden ein kurzer Ton. Diese Funktion kann abgeschaltet werden.
WEBSCHNITTSTELLE VERWENDEN NEUSTART DES OMNITOUCH 4135 IP Wählen Sie Settings > Basic. Neustart des Telefonprogramms Dieser Neustart startet nur das Telefonprogramm mit den aktuellen Einstellungen neu. Dies dauert etwa eine halbe Minute. Klicken Sie auf Restart. Neustart des Telefons Dieser Neustart schaltet das Telefon aus und startet es erneut. Dies dauert etwa drei Minuten. Klicken Sie auf Reboot.
WEBSCHNITTSTELLE VERWENDEN STATUS ÜBERPRÜFEN Im Menü Status kann man keine Einstellungen vornehmen, die Informationen können aber bei der Fehlersuche hilfreich sein. Wählen Sie Status. Unter der Registerkarte Basic können Sie unter anderem die Seriennummer des Telefons, die Adresse des Netzwerkanschlusses sowie die aktuelle Programmversion sehen. Unter den anderen Registerkarten werden die Einstellungen für Netzwerk, Zeitserver, SIP-Konto und Media angezeigt, die der Administrator vorgenommen hat.
ÜBER IP-, SIP-, URI- UND IP-TELEFONIE IP steht für Internet Protocol. Dies ist der Standard, der von Computern und anderen an das Internet angeschlossenen Geräten verwendet wird, um sich gegenseitig zu identifizieren. Der gleiche Standard wird in der Regel in lokalen Netzwerden genutzt. Eine IP-Adresse ist die einzigartige Netzwerkadresse eines Computers in einem Netzwerk.
ÜBER IP-, SIP-, URI- UND IP-TELEFONIE Telefonnummer und Netzwerkadresse Ein IP-Telefon hat sowohl eine normale Telefonnummer als auch eine Netzwerkadresse. Wenn jemand die Nummer eines IP-Telefons wählt, konvertiert die SIP-Vermittlungsstelle den Anruf in Datenpakete, die über das Netzwerk an die Netzwerkadresse des Telefons gesendet werden. Sie können von einem IP-Telefon ein anderes Anrufen, indem Sie die Netzwerkadresse verwenden.
HÄUFIGE FRAGEN UND FEHLERSUCHE Ich erhalte kein Freizeichen Kontrollieren, ob das Telefon registriert ist. Dies wird durch ein gefülltes Quadrat in der linken unteren Ecke des Displays angezeigt. Wenn das Quadrat nicht gefüllt ist, bitte Kontakt mit dem Telefonadministrator aufnehmen. Wie kann ich die Firmware im OmniTouch 4135 IP auf die neueste Version aktualisieren? Die Aktualisierung der Firmware im OmniTouch 4135 IP erfordert das Einloggen als Administrator.
ZUBEHÖR 48 Art.-Nr. Bezeichnung 3GV28133AA AC/DC Netzgerät 3GV28134AA Zusatzmikrofone (1 Paar), erweitern den Aufnahmebereich auf bis zu 70 m2.
TECHNISCHE DATEN Maße Durchmesser: 240 mm, Höhe: 77 mm. Gewicht 1 kg Farbe Liquorice black Display Hintergrundbeleuchtetes grafisches LCD, 128x64 Tastenblock Alphanumerische 0–9, *, EIN/AUS, Stummschaltung, Warteposition (hold), Lautstärke erhöhen, Lautstärke verringern, 5 Tasten für die Navigation im Menüsystem, Wahlschalter, Konferenzführer Diebstahlschutz Kensington security slot. Speicher Unterstützt SD-Speicherkarte bis 2 GB.
TECHNISCHE DATEN Umfeldbedingungen Temperatur: 5° – 40°C Luftfeuchtigkeit: 20–80 % kondensfrei Empfohlene akustische Raumbedingungen: Nachhallzeit: 0,5 S Rt 60 Hintergrundgeräusche: 45 dBA Prüfungen/Zulassungen Elektrische Schutzklasse EN 60950-1:2006, ANSI/UL 60950-1-2002, CAN/CSA-C22.2, No. 60950-1-03 EMC/Funk 50 EN 301 489-3 V1.4.1 (2002-08), EN 301 489-1 V1.6.
110127-61-001 Rev 3B