User Guide

y Click on <Deactivate> to release default setting
6. System settings
Click to validate the sound prompt when the Internet will be
connected/ disconnected.
7. Request PIN
y Click on the <Request PIN> menu and select <Enable/Disable PIN>.
Activate the PIN input dialog box;
y Select <Enable PIN> and Enter the correct PIN code;
y Click on <OK>.
8. Change PIN
y Click on <Change PIN>, and activate the PIN modify dialog box;
y Input the old PIN and the new PIN, then confirm;
y Click on <OK> to confirm the new PIN code
Note: You can only access the modify menu if the PIN is enabled.
9. Unlock (U) SIM Card
Click on <(U)SIM Unlock>, and activate the code which is requested in
dialog box to unlock this function, Then click on <OK> to confirm;
Note: All about code is supplied by your network provider (except PIN
Code).
10. Diagnostics Statistic
y This menu is used to display the diagnostic information, including:
y Model Information: Modem Name/ Firmware version/IMEI/IMSI
y Operator Information: PIN code status/Network code/Network
selection mode/ Network mode/Signal strength.
y Network Status: CS network registration/PS network registration/PS
network attachment
11. About
You can get information on the version in the <About> menu.
12. Help
When the application is open, you can read the instructions about
Modem