Tempori_22_uk.qxd 29/05/01 17:05 Page 1 TEMPORIS 12 / TEMPORIS 22 Downloaded from - http://www.guardianalarms.
Tempori_22_uk.qxd 29/05/01 17:05 Page 2 1. SETUP l Plug one end of the spiral cord into the handset plug (A), and the other end into the socket located on the left-hand side of the phone (B). A B l Plug the telephone cord into the socket (C) situated on the back of the set and plug the other end (D) into the telephone wall socket. E C D NOTE: The spare socket (E) enables a modem to be connected. l Stick the emergency number label in the appropriate place. 2.
Tempori_22_uk.
Tempori_22_uk.qxd 29/05/01 17:05 Page 4 3. GENERAL USE 3.1 LINE LAMP / MESSAGE WAITING LAMP This light flashes in rhythm with the ringing when you receive a call. It lights up as soon as you take the line. If you are connected to a private ALCATEL telephone system equipped with mail, the message waiting lamp informs you of a message in your “mail box”. Dialling can be done in two different ways: l By lifting the handset then dialling. l By dialling in on hook mode. 3.
Tempori_22_uk.qxd 29/05/01 17:05 Page 5 4. USING THE MEMORIES NOTE: When programming your TEMPORIS communicates with you using BEEP . 1 Beep : Whilst programming, each key pressed is validated by 1 BEEP . 2 Beeps : Indicate that your programming is correct. 3 Beeps : Something is wrong in your programming; Restart from the beginning. Your telephone set can store 10 numbers of up to 24 digits. 4.1 PROGRAMMING THE MEMORIES Programming without calling l Go off hook. l Press the Programming key.
Tempori_22_uk.qxd 29/05/01 17:05 Page 6 To adjust the ringing: l Press the Programming key then key 1 (current melody is heard). l To reduce or increase ringing volume, press or on TEMPORIS 22 or press or on TEMPORIS 12. l Pressing a key between 1 and 4 changes the melody. To put ringer ON/OFF: l Press the Programming key then key 0. l Press to put the ringer OFF. When ringer is OFF, 4 BEEP are heard when picking up the handset. l Press to put the ringer ON. l Put the handset on hook. 6.
Tempori_22_uk.qxd 29/05/01 17:05 Page 7 6.4 IF YOU FORGOT THE PASSWORD BEEP BEEP Access the programming mode again and then: l Press the Programming key followed by 0. l Press the * key. l 2 beeps are generated. l Go on hook. This last operation erases the WHOLE programming including F memories. The password is 0000 again. 7. CONFIGURATION FOR PROFESSIONAL USE If your TEMPORIS is connected directly to the public network, do not pay attention to this chapter. 7.
Tempori_22_uk.qxd 29/05/01 17:05 Page 8 8. GUARANTEE l This product is guaranteed according to the clauses offered by your distributor. l To get this guarantee you must use your telephone according to the instructions of the user guide and you have to keep the invoice or ticket mentioning purchasing date and distributor name.