User Manual

  

 
  

8 Data Services - PPP & IP Routing
142 / 362
3EC 17766 AAAA TCZZA Ed. 01
The 'Mode' field allows you to configure how a PPP session is
opened.
Three options are available:
" DialĆin
The PPP session is opened manually by clicking next
to the PPP connection in the 'DialĆin' web page.
" AlwaysĆon
After the STWireless is powered and finished its POST
successfully, the STWireless automatically tries to open a PPP
session for the PPP connection.
" DialĆonĆdemand
The PPP session is opened automatically for a limited period
of time. The opening of the session is triggered by the arrival
of packets at a/the STWireless Ethernet port, to be sent over
the PPP connection.
Note: By default one PPP connection is configured as 'DialĆin' (i.e.
PPP1), and another as 'AlwaysĆon' (i.e. PPP2).
In case you configured a PPP connection for 'DialĆonĆdemand',
the 'Idle Time Limit' box allows you to specify the time after which
an opened, but unused PPP session is closed.
If left free, the idle limit time is infinite (i.e. the PPP session will
never be closed).