User's Manual

A-22

A.2.11.2

MCS-11 Repeater-to-Spur Daisy Chain Connection (J308/J309)

MCS-11 must be provisioned

MCS-11 J310 Master/Junction

enable XMT, RCV, and OUTPUT clocks. If an external modem is

being used, provision MCS-11 for

MCS-11 J310 Modem

. This selec-

tion disables XMT, RCV,OUTPUT clocks and all MCS-11 clocks

must now be provided by the external modem.

MCS-11 connector J308/J309 is typically used to connect a repeater to a spur or multi-

ple spurs in a daisy chain system conﬁguration. Either repeater shelf 1 or repeater

shelf 2 may feed the spur shelf. The ﬁrst connection out of the repeater must be cross-

wired from J308 to J308. Then, every shelf from the spur must be wired 1:1, J309 to

J308, in a daisy-chain fashion.

CROSSWIRED CABLE ASSEMBLY – Recommended connectorized cable assembly –

PN 695-7837-001 through -005 (26 AWG 8 pair shielded, jacketed cable with 15-pin

D-type connector on each end). See Figure A-14 for shelf connector J308 location and

pinout. See Figure A-14 for shelf connector J309 location and pinout.

DAISY CHAIN CABLE ASSEMBLY – Recommended connectorized cable assembly –

PN 695-7837-021 through -025 (26 AWG 8 pair shielded, jacketed cable with 15-pin

D-type connector on each end, wired 1:1).

Note