Product Info
Table Of Contents
- 1 General
- 1.1 INTRODUCTION
- 1.2 STANDARD FEATURES
- 1.3 NAMING CONVENTION
- 1.4 ORDERING INFORMATION
- 1.5 SYSTEM CONFIGURATIONS
- 1.6 RADIO CONFIGURATIONS
- 1.7 FEATURES AND OPTIONS
- 1.7.1 Primary Power
- 1.7.2 Transmit Power Level Options
- 1.7.3 Differential Absolute Delay Equalization (DADE)
- 1.7.4 Trellis Encoding and Time Domain Equalization (TDE)
- 1.7.5 MCS-11 Alarm/Control Interface
- 1.7.6 Foreign Alarm Interface
- 1.7.7 Relay Interface Option
- 1.7.8 Extended Link Monitor Channel
- 1.7.9 Automatic Transmitter Power Control Provisioning Option
- 1.7.10 Service Channels Provisioning Options
- 1.7.11 Mechanical Options
- 1.7.12 Capacity upgrade
- 1.7.13 Bandwidth upgrade
- 1.8 USER SYSTEM INTERFACE (USI)
- 1.9 RADIO CHARACTERISTICS
- 1.10 EXTERNAL INTERFACE REQUIREMENTS
- 1.11 EQUIPMENT LISTING
- Table 1-6 MDR-8000/i/s Common Shelf Assembly
- Table 1-7 Supplied and Optional Equipment
- Table 1-8 I/O Interface Options
- Table 1-9 XMTR Options
- Table 1-10 PA Options
- Table 1-11 RCVR Options
- Table 1-12 Capacity Keys for Transmitter and Receiver Modules
- Table 1-13 LBO Options
- 1.11.1 Diplexer Filter Kits
- 1.11.2 Standard Filter Kits
- 1.11.3 Cable Drop Kit Option
- 1.12 FAN ASSEMBLY
- 1.13 HANDSET KIT
MDR-8000 Series Radios 3DH03220
General Issue 6, July 2002
1-10
1.7.11
Mechanical Options
Mechanical options include:
• Racks. Refer to Table 1-1 for characteristics.
• Shelf covers - One front cover is provided.
• Rack extension kit PN 690-1125-001 through 005 - Extends 7-ft racks
PN 690-1124-XXX and 694-9000-XXX to any height from 7 ft 3-1/2 in. to
11 ft 6 in. The purpose of the extensions is to provide top support mount-
ing above the 7-ft level.
• Adjacent rack attachment (without/with rack extension) kit PN 694-
9004-001/002 – Provides hardware for bolting two rack assemblies (PN
694-9000-XXX) together. The -001 kit is used to tie two racks together
that do not have the optional rack extension kit (PN 690-1125-003)
installed. Kit -002 is used when the two racks have the optional rack
extension kit.
Guardrails and AC outlets are field installed and are sent in
shipper kits.
• Guardrail kit PN 690-4367-005 through -008 - Protects front only (PN
690-4367-007), front and rear (PN 690-4367-008), or sides (690-4367-005
and -006) of all configurations of rack PN 690-1124-XXX.
• AC outlet kit PN 690-4373-001 - Provides hardware for mounting ac out-
let to the guardrail (PN 690-4367-XXX).
• Optical Fiber Management Panel (OC3 only). Optical fiber management
panels are available for 2 or 4 fiber and for 2- or 4-fiber switched configu-
rations. Each optical fiber management panel supports two MDR-8000s
radio shelves. The 2- or 4-fiber switched optical fiber management panel
(PN 3EM09257AA) is used with splitter/combiners to support 2 or 4 fiber
switched applications using multimode or single mode fibers. For non-
switched applications, the 2 or 4 fiber optical fiber management panel
(PN 3EM09257AB) is used to support 2 or 4 fiber configurations.
Note