Product Info
Table Of Contents
- 1 General
- 1.1 INTRODUCTION
- 1.2 STANDARD FEATURES
- 1.3 NAMING CONVENTION
- 1.4 ORDERING INFORMATION
- 1.5 SYSTEM CONFIGURATIONS
- 1.6 RADIO CONFIGURATIONS
- 1.7 FEATURES AND OPTIONS
- 1.7.1 Primary Power
- 1.7.2 Transmit Power Level Options
- 1.7.3 Differential Absolute Delay Equalization (DADE)
- 1.7.4 Trellis Encoding and Time Domain Equalization (TDE)
- 1.7.5 MCS-11 Alarm/Control Interface
- 1.7.6 Foreign Alarm Interface
- 1.7.7 Relay Interface Option
- 1.7.8 Extended Link Monitor Channel
- 1.7.9 Automatic Transmitter Power Control Provisioning Option
- 1.7.10 Service Channels Provisioning Options
- 1.7.11 Mechanical Options
- 1.7.12 Capacity upgrade
- 1.7.13 Bandwidth upgrade
- 1.8 USER SYSTEM INTERFACE (USI)
- 1.9 RADIO CHARACTERISTICS
- 1.10 EXTERNAL INTERFACE REQUIREMENTS
- 1.11 EQUIPMENT LISTING
- Table 1-6 MDR-8000/i/s Common Shelf Assembly
- Table 1-7 Supplied and Optional Equipment
- Table 1-8 I/O Interface Options
- Table 1-9 XMTR Options
- Table 1-10 PA Options
- Table 1-11 RCVR Options
- Table 1-12 Capacity Keys for Transmitter and Receiver Modules
- Table 1-13 LBO Options
- 1.11.1 Diplexer Filter Kits
- 1.11.2 Standard Filter Kits
- 1.11.3 Cable Drop Kit Option
- 1.12 FAN ASSEMBLY
- 1.13 HANDSET KIT
3DH03220 MDR-8000 Series Radios
Issue 6, July 2002 General
1-39
Fan Assembly With Fans 967-0500-003
Fan Alarm Board 3DH 04169 AA
Heat Deflector 3EM 03390 AA For use with fan assembly
UD-36( ) Receiver: Application and Frequency
Dependent
Refer to Table 1-11
Two required for hot-standby
UM-62AX Crystal Oscillator Sub
board
3DH 04123 AX
Frequency Dependent
The crystal oscillator subboard and crystal
part numbers define this unit. The crystal is
soldered to the oscillator subboard and fac-
tory tuned to the customers requirements.
See drawing 3DH 03177 0000 BJZZA in
the Diagrams section.
Capacity Key Modulation and Capacity
Dependent
Refer toTable 1-12.
Line Buildout (LBO) Application and Distance
Dependent
Refer to Table 1-13.
AE-27AF Relay Interface 3DH 03219 AA Optional
2 X 4 Fiber Management Panel 3EM 0957 AA Optional. For use with OC3 2- or 4-fiber
switched configurations. Provides interface
for one or two radio shelves.
Single-mode Splitter/Combiner 1AB 12332 0023 Single-mode fiber interface. One per radio
shelf required.
Multi-mode Splitter/Combiner 1AB 12332 0022 Multi-mode fiber interface. One per radio
shelf required.
2 or 4 Fiber Management Panel 3EM 0957 AB Optional. For use with OC3 2- or 4-fiber
configurations. Provides interface for one
or two radio shelves. SC mating connectors
required.
Handset Kit 3CC07946AAAA Optional
Coiled Cord, RJ11 to RJ11 155-3362-010 Replaces RJ9 to RJ11 cord supplied with
handset kit.
Diplexer Filter Kit Frequency Dependent Refer to drawing 3DH 03177 0000
UDZZA in the Diagrams section.
Waveguide Iso-Adapters Frequency, Waveguide, and
Configuration Dependent
Optional. Refer to drawing 3DH 03177
0000 BJZZA in the Diagrams section.
Waveguide Flanges Frequency, Waveguide, and
Configuration Dependent
Optional. Refer to drawing 3DH 03177
0000 BJZZA in the Diagrams section.
Customer Interface Cables Applications Dependent Optional. Refer to drawing 3DH 03177
0000 BJZZA in the Diagrams section.
Table 1-7 (Cont.) Supplied and Optional Equipment
UNIT/MODULE PART NUMBER REMARKS