User's Manual

5-62
Figure 5 - 22 RCVR Crystal Oscillator Subboard Removal/Installation
CRYSTAL OSC
SUBBOARD
J8
RCVR–RIGHT SIDE VIEW
MDR-1064
10/04/04
Ensure board edge does not make
contact with chassis wall.
Note
Remove:
a
Remove Receiver from card cage.
Install:
e
Place Crystal OSC Subboard in
mounting cavity.
f
Install 3 mounting screws.
h
Install cover with 8 screws.
i
Install Receiver in card cage.
g
Connect ribbon cable to Connector J8.
b
Remove 8 screws from Crystal OSC Subboard cover, and remove cover.
c
Disconnect ribbon cable from J8.
d
Remove 3 mounting screws, and
remove Crystal OSC Subboard.