User's Manual

Product Information Manual Functional operation
211
DRAFT — Internal
• For MPT-HLC frequency plan for the 5.725 and 5.850 GHz unlicensed band,
see Figure 61.
• For 9558HC frequency plan for the 5.725 and 5.850 GHz unlicensed band,
see Figure 62.
Output Power: A requirement of operating in the unlicensed band is to limit transmit
output power to not more than +30.0 dBm at the antenna port. It is the responsibility
of the user to transmit not more than +30.0 dBm.
Figure 60 Frequency plan MPT-HL: 5.725 to 5.850 GHz unlicensed band (FCC Part 15 and IC
RSS-210)
Note: To meet FCC part 15 requirements, output power for 9558HC 30 MHz 4QAM and
8QAM channels must not be provisioned greater than 24 dBm. This is not enforced by the
user interface and is the responsibility of the operator to guarantee provisioning of the radio
transmit power. For transmit power specification, refer to the 9500 MPR-A MPT-HL
Engineering Specifications.
Transmit Channel Frequency (MHz) Receive Channel Frequency (MHz)
G1 5730 G1’ 5795
G2 5735 G2’ 5800
G3 5740 G3’ 5805
G4 5745 G4’ 5810
G5 5750 G5’ 5815
B1 5760 B1’ 5825
B2 5765 B2’ 5830
B3 5770 B3’ 5835
B4 5775 B4’ 5840
B5 5780 B5’ 5845