User's Manual

Radio
350 9500 MPR Product Information
The antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 12 meters from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Frequency Plan:
• For MPT-HL frequency plan for the 5.725 and 5.850 GHz unlicensed band, refer to
Figure 8.77.
• For MPT-HLC frequency plan for the 5.725 and 5.850 GHz unlicensed band, refer to
Figure 8.78.
• For 9558HC frequency plan for the 5.725 and 5.850 GHz unlicensed band, refer to
Figure 8.79.
Output Power: A requirement of operating in the unlicensed band is to limit transmit output
power to not more than +30.0 dBm at the antenna port. It is the responsibility of the user to
transmit not more than +30.0 dBm.
Figure 8.77 — Frequency plan MPT-HL: 5.725 to 5.850 GHz unlicensed band (FCC Part 15 and IC RSS-
210)
Caution: Danger of public exposure to long term RF radiated energy. When using a 1 ft
flat panel antenna with a 1 watt (+30 dBm) output power, the antenna must be located
in an area that does not allow the general population access to within 12 meters (5.8 Ghz)
of the antenna.
Note: To meet FCC part 15 requirements, output power for 9558HC 30 MHz 4QAM and
8QAM channels must not be provisioned greater than 24 dBm. This is not enforced by the
user interface and is the responsibility of the operator to guarantee provisioning of the
radio transmit power. For transmit power specification, refer to the 9500 MPR-A MPT-HL/
HLC Engineering Specifications.
Transmit Channel Frequency (MHz) Receive Channel Frequency (MHz)
G1 5730 G1’ 5795
G2 5735 G2’ 5800
G3 5740 G3’ 5805
G4 5745 G4’ 5810
G5 5750 G5’ 5815
DRAFT